Planned STOs (shutdowns, turnarounds and outages) are scheduled for preventative maintenance and new equipment installation that must be performed to keep a plant running and in regulatory compliance. To minimize production downtime, this work must be completed within a very tight time frame. As such, STOs are often feats of engineering, planning and coordination—work that begins many months, even years, before the event.
At the top of the list during any planned shutdown is safety. To prevent injury or loss of life, reduce liability, and keep insurance rates in check, safety departments must provide the required safety training, products and services that will ensure that all onsite personnel and company assets are protected throughout the scope of the operation.
Managing all that encompasses “safety.” For an STO, however, is often a feat of its own.
Swelling ranks
During an STO, a typical facility can see its ranks swell from 50 employees to perhaps 200-300 additional workers that the safety department must properly equip, train and provide with rescue and standby emergency services. This often requires managing multiple vendors of safety products and services as well as dealing directly with workers that are not familiar with the facility or its processes and are performing challenging, even high-risk, tasks.
Now, in a move designed to eliminate a point of complexity and coordination in an already complicated process, some facility safety departments are outsourcing to a single combined safety service provider that can deliver the entire gamut of safety-related products and services.
The benefit of this one-stop-shop approach for a planned shutdown is the single point of coordination, reduction in facility personnel required to manage the safety effort, access to extensive safety expertise and technical knowledge, potential cost savings on basic and more advanced PPE (personal protective equipment) and the ability to respond quickly to unexpected situations or emergencies.
Safety first
Despite the focus on speedy return to service, those that have participated in planned shutdowns will attest that the primary emphasis is not how fast the work is completed, but rather ensuring the safety of all involved.
“Safety is number one,” said Kevin Nadolski, safety director at Duke & Duke Services. “Well before any of the work starts, the project managers are holding safety meetings and orienting employees on safety. This occurs both before and during the project, with managers reviewing daily reports about how many personnel are working, what they are doing, and if any are hurt they want to know exactly what happened.”
As a safety director, Nadolski has utilized a number of PPE providers and safety service companies over the course of his career. Duke & Duke Services provides installation and maintenance of conveyor systems, bulk handling equipment, presses, cranes, robotics and other automated machinery—often during STOs.
He admitted that the concept of a single, combined safety service provider is a novel concept in an industry where suppliers generally keep to well-defined market segments with minimal overlap. Large PPE providers, for example, offer catalogues with thousands of products, but rarely offer safety services—and vice versa.
Outsourcing safety
Nadolski first began outsourcing to a company that was later acquired by DXP Safety Services while working at a prior job, and has continued to use the company throughout the five years he has been employed as safety director at Duke & Duke.
For example, DXP Safety Services now operates as a single provider of combined safety products and services for plant turnarounds.
In addition to an extensive product catalogue of PPE items, the company maintains a large asset base of equipment including powered air trailers, supplied air trailers, emergency showers, eye wash equipment, MROP (maintenance, repair, operations and production) trailers, fire trucks and ambulances. It also offers a comprehensive list of services, including safety training and supervision, confined space attendants and rescue teams, high angle rescue teams, rope rescue, gas detection, respiratory fit testing, audiometric testing, industrial hygiene, industrial medical services, fall protection and repair services.
Nadolski estimated he had used DXP a dozen times for onsite safety supervision, emergency response, confined space attendants and supplied air trailers. He also utilizes DXP to train employees that must complete annual confined space training.
“What I appreciate most is that when they send their guys out for rescue work, I know they are well-trained,” added Nadolski. “I still spot check them and ask them ‘what do you do if this happens?’ questions, but they know it right off the bat. I don’t always get that with other safety services.”
Given the unique requirements of each facility, there are no one-size-fits-all safety plans so each project is client specific. The scope of involvement can be scaled from a single worker to a complete program for the entire scope of the STO.
Chris McKinnon is with DXP Safety Services.
Recommended Reading
Kimmeridge’s Mark Viviano on Reshaping the Energy Sector, SilverBow-Crescent Deal
2024-05-16 - Kimmeridge Energy Engagement Partners’ Mark Viviano says the company is evaluating the Crescent Energy and SilverBow Acquisition and how Kimmeridge played a key role in transforming the shale sector in this Hart Energy Exclusive interview.
Oil, Gas Groups Sue BLM to Block Increased Federal Drilling Fees
2024-05-16 - Under new U.S. Bureau of Land Management rules, royalty rates will jump to 16.67% from 12.5% and minimum lease bonds will increase to $150,000 from $10,000, which industry groups say will deter future oil and gas development.
SilverBow Resets Shareholder Meeting After $2.1B Crescent Deal
2024-05-16 - SilverBow Resources said it will adjourn its May 21 shareholders’ meeting until May 29 following Crescent Energy’s agreement to buy the Eagle Ford operator.
SUPER DUG Shale 4.0 Era about Building Scale- Rystad
2024-05-16 - The Shale 3.0 era or capital discipline era will be followed by the Shale 4.0 era, which will see companies focused on building scale, according to Rystad Energy Senior Shale Analyst Matthew Bernstein.
BPX Looks to Ramp US Production Over 60% by 2030
2024-05-16 - BPX Energy is looking to boost its U.S. production over 60% by 2030 as it considers bringing online a fourth processing facility in the Permian by mid-year 2025, Clark Edwards, the company’s vice president of development, said during SUPER DUG in Fort Worth.